Quiet green domestic furnishings, architectural flax textiles, and turned Texas ash furniture.
Solid AshFurniture
Solid timber furniture built from Texas white ash
Central Texas white ash benches, mortise side tables, and rush-seated stools milled from salvaged timber. Built with pinned joinery and zero synthetic composite panels.
Price Range • Furniture Department$480 – $1,450 USD
SpecificationStandard BaselineProvenance
Primary TimberQuartersawn solid Texas white ash (Fraxinus americana), moisture content 7 to 9 percentCentral Texas
Joinery StandardBlind and through mortise-and-tenon joints secured with hand-planed ash drawbore dowelsMechanical Lock
Full dimensions and mechanical joinery tolerances for the turned Texas white ash entry bench. Designed for entryways and bed footboards requiring resilient solid timber.
Seat Slab Thickness1.75-inch solid quartersawn plank with chamfered bottom perimeter and relieved hand edgeSolid Core
Leg JoineryTurned cylindrical legs seated into wedged through-tenons locked with contrast walnut keysThrough-Tenon
Weight RatingStatic load tested to 650 lbs across two spans; zero racking under lateral test loads650 lbs Test
Woven Rush Ash Stool • Three-Way Splayed Leg Frame
Rush Seating Specification
The hand-woven rush stool provides compact auxiliary seating for dining ledges, dressing tables, and quiet study rooms. Cord is hand-tensioned without synthetic cord cores.
Cord MaterialTwo-ply natural river rush cord, harvested freshwater reeds dried and twisted wetNatural Fibre
Stretcher BracingTurned ash lower rails set at staggered elevations to prevent tenon collision in leg coresStaggered Bracing
Tripod Ash Side Table • Flush Circular Top
Side Table Specification
Round occasional table for quiet living rooms and reading chairs. Three angled ash legs pass directly through a turned disc with visible end-grain wedging.
ComponentEngineering DataBasis
Catalog ReferenceRound Solid Ash Side Table (catalog/catalog.html)SKU: FUR-TABLE-TRIPOD
Base GeometryTri-leg splay angle 8 degrees for stability on low-pile wool rugs or slate flooringTripod Base
Quartersawn Ash Grain • Mechanical Drawbore Peg
Joinery Standards & Timber Criteria
Timber sourced from urban salvage and managed Central Texas woodlands. Boards are kiln-tempered and acclimated to Texas indoor humidity prior to milling.
StandardStudio ProtocolVerification
Grain SelectionStraight-grain quartersawn boards prioritized for leg posts; cathedral flatsawn grain reserved for bench topsVisual Inspection
Moisture EquilibriumWood stabilized at 8 percent moisture content in temperature-monitored Austin studio storageMoisture Pin Test
Adhesive StandardType II water-resistant PVA glue paired with drawbored wooden dowels; zero formaldehydesNon-Toxic
Hand-Pared Tenon Fitting • Chisel Work at Riverside Studio
Quote Determinants & Order Process
Catalog furniture is supplied without retail markups. Quotes are based on verified timber board footage, finish selection, and dispatch destination.
StageProcedureTiming
Step 1 • InquireSubmit room dimensions and piece selection using the terminal below or directly via telephoneSame Day
Step 2 • Spec SheetStudio provides PDF specification sheet with exact timber grain photographs and dimensionsWithin 24 Hours
Step 3 • DispatchCatalog inventory packed in blanket crates and dispatched immediately from 701 West Riverside DriveImmediate
Trade Objections & Exclusions
We state our operational boundaries clearly to ensure proper architectural alignment:
Not For Outdoor UseWhite ash is an interior timber. Exposure to direct rain or soil moisture will compromise finishes.Interior Only
No Synthetic CoatingsWe refuse plastic polyurethane finishes. Ash must breathe and accepts periodic linseed soap care.Soap & Wax Only
Inquiry OnlyWe operate without an automated online cart. Every order is reviewed by an interior decorator.Direct Inquiries
Furniture Specification Inquiry
Connect directly with our Austin studio team. Inquire about current inventory availability, custom bench lengths, or immediate local delivery.
Frequently Asked Questions
Furniture prices range from $480 to $1,450 USD per piece based on timber board footage, joinery complexity, hand-woven rush cord labor, and customized sizing. Catalog items are clearly marked without hidden fabrication fees.
Lead time is immediate for catalogued stock stored at our Austin facility at 701 West Riverside Drive. Bespoke dimension commissions or trade orders requiring multi-unit timber runs are quoted with exact production windows upon room review.
Every piece is finished with natural linseed soap and low-VOC matte hardwax oils. We avoid polyurethane coats to preserve the natural grain breathability. Maintenance requires an occasional wipe down with pure vegetable soap emulsion.
Yes. Trade partners, architects, and private homeowners can schedule an appointment at our Riverside Drive studio to examine wood grain samples, seating mockups, and drawbore joint details.